Skip to content
Single-View Shooting Setup for Autel Multi-Sensor Camera Drones

Single-View Shooting Setup for Autel Multi-Sensor Camera Drones

In Autel dual-camera or multi-sensor camera drones, the thermal camera provides a completely different perspective. However, in some situations, we also need a full-screen display from a single viewpoint.

Below, please see our guide to single-view setup for drone cameras!

Dual-Camera Drone – EVO II Dual 640T

The Autel EVO II Dual 640T features an 8K RGB camera and a 640*512 thermal imaging camera. It offers three screen displays on the remote controller: visible light, thermal imaging, and picture-in-picture.

When using picture-in-picture mode for dual-view shooting, the drone records visible light, thermal, and picture-in-picture files simultaneously, but does not support thermal imaging temperature measurement.

Picture-in-picture mode increases storage pressure on the drone. In photo mode, a single shot will produce three JPG photos, one TIFF file, and one .irg file. In video mode, a single shot will produce infrared, visible light, and picture-in-picture MP4 files, with multiple files simultaneously occupying SD card space.

Autel 640T Picture-in-picture mode

Multi-Sensor Camera Drones – EVO Max 4T/4N

The EVO Max series drone camera gimbals carry multiple sensors. The EVO Max 4T supports zoom cameras, wide-angle cameras, thermal cameras, and laser rangefinders. The EVO Max 4N supports starlight night vision cameras, wide-angle cameras, thermal cameras, and laser rangefinders.

In the Autel Enterprise application, users can freely choose to capture only RGB signals, only thermal imaging signals, or dual-signal capture for single-view, dual-view, or triple-view(Zoom+ IR + Map) displays.

In single-camera payload settings, only JPG and MP4 files in RGB mode or JPG format with temperature information in IR mode, as well as the proprietary infrared radiometric thermography format IRG files and MP4 files, are recorded.

EVO Max Zoom View

EVO Max Zoom View

EVO Max IR View

EVO Max IR View

The purpose of using multiple sensors is to acquire richer and more comprehensive information (resolution, thermal radiation, night vision, etc.). In practice, photogrammetry under a single visible light perspective can reduce processing complexity and software compatibility requirements. Inspection and target identification under a fused visible light perspective yield more accurate data, facilitating intuitive operator interpretation.

Back to blog