All-weather Drone Detection Jammer Skyfend AFA100

Skyfend AFA100 is an all-weather drone detection jammer, which can deal with the threat of full-band drones (400Mhz-6Ghz). It is widely used to protect critical infrastructure and public places, and is an important countermeasure tool for drones.

Using advanced radar technology and electronic jamming technology, Skyfend AFA100 can quickly detect nearby drone signals and generate jamming signals to make drones lose connection, flight control and navigation. At the same time, it also has flexible settings and operations, and a 3.5-inch touch screen, which can adapt to the detection and jamming requirements of drones in different environments.

Skyfend AFA100 can continuously detect for eight hours in standby mode, and can continuously work for one hour in interference mode. The IP65 dustproof and rainproof design supports all-weather work.

Skyfend AFA100 has advanced anti-drone detection jamming technology, this is not a toy gun. All-weather drone detection and jamming device Skyfend AFA100 is an anti-drone jammer that combines drone detection technology and drone jamming technology. The IP protection level of the anti-drone jammer effectively guarantees the all-weather operation of Skyfend AFA100.

All-weather Drone Detection Jammer Skyfend AFA100 with IP65

IP Ratings - What They Mean.

First Digit (intrusion protection)

0.(or X): No special protection.

1.Protection from a large part of the body such as a hand (but no 2.protection from deliberate access); from solid objects greater than 50mm in diameter.

3.Protection against fingers or other object not greater than 80mm in length and 12mm in diameter (accidental finger contact).

4.Protection from entry by tools, wires etc, with a diameter of 2.5 mm or more.

5.Protection against solid objects larger than 1mm (wires, nails, screws, larger insects and other potentially invasive small objects such as tools/small etc).

6.Partial protection against dust that may harm equipment.

Totally dust tight. Full protection against dust and other particulates, including a vacuum seal, tested against continuous airflow.

Second Digit (moisture protection)

0.(or X): No protection.

1.Protection against vertically falling droplets, such as condensation. 2.Ensuring that no damage or interrupted functioning of components will be incurred when an item is upright.

3.Protection against water droplets deflected up to 15° from vertical

Protected against spray up to 60° from vertical.

4.Protected against water splashes from all directions. Tested for a minimum of 10 minutes with an oscillating spray (limited ingress permitted with no harmful effects).

5.Protection against low-pressure jets (6.3 mm) of directed water from any angle (limited ingress permitted with no harmful effects).

6.Protection against direct high pressure jets.

7. Protection against full immersion for up to 30 minutes at depths between 15 cm and 1 meter (limited ingress permitted with no harmful effects).

8. Protection against extended immersion under higher pressure (i.e. greater depths). Precise parameters of this test will be set and advertised by the manufacturer and may include additional factors such as temperature fluctuations and flow rates, depending on equipment type .

9.(K): Protection against high-pressure, high-temperature jet sprays, wash-downs or steam-cleaning procedures - this rating is most often seen in specific road vehicle applications (standard ISO 20653:2013 Road Vehicles - Degrees of protection ).